M.Sc.
(Electrical
Engineering-Device Electronics)
Amirkabir University of
Technology (Tehran Polytechnic) Tehran, Iran, fall 2003-to date.
Area of Research:
Semiconductor devices and materials
B.Sc.
(Electrical
Engineering-Electronics)
Shahid Beheshti
University, Tehran, Iran, Fall 1999-summer 2003.
Graduated with GPA
17.71/20.00.
·
Experience in thin-film processes and device fabrication steps.
·
Familiarity with various analysis methods of characterization such as SEM,
EDX, XRD, AFM,
RBS,…
·
Familiarity
with characterization of semiconductor devices especially metal
semiconductor contacts.
·
Familiarity
with solar cell fabrication processes.
·
Experience in
electrodeposition methods (Electroplating and Electroless plating) for
metallization.
·
Photovoltaics
·
Optoelectronics
·
ZnO and ITO
based devices
·
Metal-semiconductor contacts
·
Fabrication
of III-V devices
·
Semiconductor
material and device characterization
First
rank among graduates of electrical engineering in 2003.
·
Experience in design and simulation of analog circuits using HSpice, PSpice,
Orcad.
·
Experience in design and simulation of high frequency electronic circuits
using Advanced Design System (ADS).
·
Experience in design and simulation of low power digital integrated
circuits.
·
Experience in simulation and implementation of digital systems using VHDL.
·
Experience in FPGA programming and simulation of digital circuits and
systems using Xilinx Foundation.
·
Familiarity with programming languages such as C++, Matlab.
·
Familiarity with simulation of solar cells using PC1D.
May-Sept. 2003 Research
assistant, Microelectronic research center, Faculty of electrical and
computer engineering, Shahid Beheshti University
·
Design and
simulation of a frequency synthesizer using an all digital PLL
Sept. 2003-Sept. 2004
Research assistant,
Photonic research Lab., Amirkabir University of Technology (Tehran
Polytechnic)
Sept. 2004-to date
Research assistant, Thin Film Lab., University of Tehran
·
Nickel and
Copper metallization by electroplating and electroless plating methods
·
Optimization
of deposited Ni and Cu films for multicrystalline Si solar cells
·
Ni/Cu
metallization as an Ohmic contact for low cost solar cells
·
Investigating
the electro-optical properties of ZnO thin films on different substrates
·
Working on
fabrication of electrical contacts to ZnO thin films
·
Characterization of metal-semiconductor contacts
Spring 2003 Teaching
assistant (Electronics I), Shahid Beheshti University
Spring 2006 Teaching
assistant (Electronics III), Amirkabir University of Technology (Tehran
Polytechnic)
·
Manavizadeh, N.; Safa
Isini, R.;
Asl Soleimani, E.; Dehghan Nayyeri, F.; Mohajerzadeh, S.; Ghafoori-Fard, H.,
“Investigation of electroplated Ni/Cu ohmic contact on multicrystalline
silicon for solar cells,” Proceedings of the Iran Physics Conference, 2005.
·
R.
Safa Isini,
N. Manavizadeh, B. Esfandyarpour, H. Ghafoori-Fard, E. Asl Soleimani, and Z.
Taheri, “Optimization of structure and contact resistance of
electrodeposited Ni/Cu ohmic contact to multicrystalline silicon,” submitted
to 14th Iranian Conference on Electrical Engineering (ICEE2006),
Iran.
·
N.
Manavizadeh, R. Safa Isini,
B. Esfandyarpour, E. Asl Soleimani and H. Ghafoori-Fard,” Low
Cost Electroplated Ni/Cu Ohmic Contacts for Multicrystalline Si Solar Cells
Using an Ultrasonic System, ” submitted to IEEE Canadian Conference on
Electrical and Computer Engineering CCECE 2006.
·
R.
Safa Isini,
N. Manavizadeh, B. Esfandyarpour, E. Asl Soleimani, and H. Ghafoori-Fard,
“Modification of structure and quality of an electrodeposited Ni/Cu ohmic
contact to multicrystalline silicon using an ultrasonic system,” submitted
to Iranian Journal of Chemistry and Chemical Engineering (IJCCE).
|
