Fatemeh Dehghan Nayeri

P. O. Box No. 1689864161

Phone: (+98) 912 3459806

(+98) 2177363913

E-mail: Nayeri@tfl.ir

             f.d.nayeri@gmail.com

 My CV (in PDF)

Link:http://www.tfl.ir/Fatemeh Dehghan Nayeri.htm

M.Sc. (Applied Physics- Solid State Physics)

Azad University of Tehran, Tehran, Iran, December 2002 to March 2005.

GPA (up to now)18.00/20.00

Seminar: Investigation doping phosphor by chemical vapor deposition (CVD) for Solar Cell. 

Thesis: Design, fabrication and optimization of contact for high efficiency solar cell.   (Advisor: Prof.E.A.Soleimani)

 

B.Sc. (Applied Physics- Solid State Physics)

Azad University of Tehran, Tehran, Iran, 1998 to 2002.

Total GPA 16.48/20.00

 

ENGLISH EXAM

 TOEFL: Paper Based TOEFL 563 / 677 (Listening 50, Structure 63 and Reading 56).

 

• Solid state devices.

• Photovoltaic solar cells

• MEMS/NEMS & BioMEMS

• Nanowire devices: Physics and fabrication processes.

• Carbon Nano-tube transistor and Zinc Oxide thin film transistor.

• Surface acoustic wave (SAW) sensor

• Thin disc laser (Design & Fabrication)

• Physical property characteristics of different material such as: ZnO, Al: ZnO, ITO, TiO2…

• Investigated High-reflection and Anti-reflection multi layer for edge-emitting thin disc Laser.

Experimental

• Extensively experienced in thin-film processes and semiconductor devices fabrication steps.

• Extensive experience in Design and fabrication high efficiency solar cells.

• Experience in optimized Ohmic contacts on single crystal and multi-crystalline substrates

• Experience in fabrication of n-doped emitter using phosphorus  for solar cell.

• Experience in growth of Zinc Oxide (ZnO) nanowires and Nanrods.

• Experience in Design and simulation with TFCalc and essential Macleod software for Filter layer

• Experienced with different deposition methods such as e-beam/thermal evaporation, RF puttering, RF and Dc-PECVD.

• Experience electroplating properties of Cu and Ni.

• Familiarity with clean room processes and equipment

• Familiarity with growth of Carbon Nano-tubes(CNT’s) by DC PECVD

• Familiarity with Micro Electro Mechanical Systems (MEMS).

• Familiarity with various analysis methods of characterization: SEM, XRD, Raman spectroscopy and FTIR.

• Familiarity with standard photolithography.

• Familiarity with MEMS modeling (Capacitive micro-accelerometers).

Software Skill

• Essential Macleod and TFCalc (Filter design simulator).

• PC1D (photovoltaic device simulator).

• Mathematic

• MATLAB 

• Programming: C++, Pascal.

• Proficiency in Microsoft office: Word, Excel, and PowerPoint

• Proficiency in Graphical Soft wares such as Adobe Photoshop.

July 2003-to date:  Research assistance in Thin Film Laboratory of Electrical and Computer Engineering Department of Tehran University: 

• Optimization of ohmic contact metal films for Multi-crystalline silicon solar cell.

• Fabrication of nano porous silicon structures by hydrogenation technique:

• Manufacturing textured silicon surfaces by means of anisotropic silicon Micromachining.

• Design configuration of front-end contact in high efficiency solar cells.

• Investigation the optical, Structural and surface morphology properties of ZnO thin film on Silicon, glass, Kapton, PET,…..

• Working on growth of ZnO nanowires as my summer internship.

• Studying electroplating properties of Cu and Ni.

• Research on a lateral etching of <111>-oriented silicon substrates for floating the microstructures.

• Investigation of RF Power Effect of Al:ZnO  thin films physical properties on glass and flexible substrate.

• Optimization of zinc oxide thin for surface acoustic wave filters by radio frequency s

Feb 2007 to date: Research assistance in Laser Research Center of Payapartove Company.

•    Study about Solid State Laser such as high Power thin disc laser.

•    Investigation Mirror Coatings for Edge-Emitting Lasers.

•    Simulated High reflection And Anti-reflection Front and Back Laser Mirror.

•    Investigation of system cooling Yb:YAG when pumped with Diode.

• Physics II, Teaching assistantship, Azad university center Tehran unit spring 2000.

• Classical Mechanics I, II Teaching assistantship, Azad university center Tehran unit, fall and spring 2001.

• Electromagnetism I, II, Teaching assistantship Azad University center Tehran unit fall and spring 2001.

• Quantum mechanic II, Teaching assistantship Azad University center Tehran unit spring 2002.

• Solid State physics, Teaching assistantship Azad University center Tehran unit spring 2002.

• Semiconductor physics, Teaching assistantship Azad University center Tehran unit, fall 2003.

 Journals

1. F.Dehghan Nayeri, B.Esfandiyarpour, E.Asl Soleimani, S.Mohajerzadeh, M.Maleki, “Cu/Mo and Cu/Ti Structural Design Fabrication of solar cells on Multi-Crystalline silicon substrates”, Iran. J. Chem. Chem. Eng. (IJCCE), Vol. 26, No.3, 2007, 55-59.

2. Y. Abdi, J. Derakhshandeh, P.Hashemi, S. Mohajerzadeh, F.Karbassian, F. Nayeri, E. Arzi and M.D.  Robertson, “Light emitting Nano-porous silicon structures fabricated using a plasma hydrogenation  technique” , Materials Science and Engineering B 124-125(2005) 483-487.

3. F. Dehghan Nayeri, et al. “A comparison between the electro-optical and structural properties of RF sputtered Zinc Oxide  (ZnO) thin films onto Glass, and Kapton substrates”, to be submitted to Journal of Material science &Engineering B.

4. F. Dehghan Nayeri, et al. “Al Metal Ohmic Contact to ZnO Thin Films”, to be Submitted to journal of Bulletin of material science.

5. F. Dehghan Nayeri, et al. “Preparation of ZnO Thin Films for UV Optoelectronic Devices”,Submitted to journal of material letters.

6. F. Dehghan Nayeri, et al. “Post deposition Annealing Effect on the Structure of Indium Tin Oxide Thin Films on flexible Polyimide Substrate”, to be Submitted to journal of material science& engineering: B.

Conferences

1. B. Esfandiyarpour, F. Dehghan Nayeri, M.R. Ketabdari & E. Asl soleimani, “Structural, morphology and optical properties of thin film ZnO deposition by RF sputtering” 6th SESAME Users’ Meeting 17-19 November, 2007Amman, Jordan.

2.  B. Esfandiyarpour, F. Nayeri, G. Daneshmand, and E. Soleimani,” Effect of annealing on the structure and optical properties of Zinc oxide thin films grown by RF sputtering”, European Material Reserch Society, nice, France, May 2006.

3. B. Esfandiyarpour, F. D. Nayeri and E. A.soleimani,” Characteristics of ZnO thin films deposited on PET, Kapton and glass Substrates by RF sputtering Method”, 1^st International Symposium on Transparent Conducting Oxides, Crete, Greece, ctober 23-25, 2006.

4. Y. Abdi, P. Hashemi, F. Karbassian, F. D. Nayeri, A. Behnam, S.Mohajerzedeh, J.koohsorkhi, M.D.Robertson and E.Arzi,” Fabrication of Nano-Crystalliane Porous Silicon on Si Substrate by a Plasma Enhanced Hydrogenation Technique”, European Material Reserch Society, May 2005.

Iranian Conferences 

1. F. Dehghan Nayeri, B. Esfandiyarpour, E. Asl soleimani, S. Mohajerzadeh, , M.R. Ketabdari, “Investigation of RF Power Effect on Nano-Crystalline ZnO thin films Physical Properties”, The 15 th Iranian Conference on Electrical Engineering, 15-17 May 2007.

2. F. Dehghan Nayeri, B. Esfandiyarpour, E.Asi Soleimani, M.R Ketabdari, S. Mohajerzadeh “Investigation of Ti/Cu and Mo/Cu Ohmic Contact Stractures on Poly Crystalline Silicon Substrates for Solar Cell Application”, Optic and Photonics Society of Iran (ICOP), 6-8 February 2007

3. B. Esfandyarpour, F. Dehghan Nayeri, S. Ebrahimi, E. A. Soleimani, M.H. Maleki, M.R Ketabdari, “Grain Size, Crystalline Structure and Residual Stress Study of Nanocrystalline ZnO Thin Film Deposited by RF Sputtering”, 2^nd National conference on Vacuum the iranian vacuum society,ferdowsi university,Mashhad, 14-15 february, 2007

4. F. D. Nayeri, B.Esfandiyarpour, E.A.Soleimani, S.Mohajerzadeh, “Investigation and fabrication of ohmic contact Cu metallization on poly silicon for application in solar cells”,Iran Physic Conference 2006,Shahrod, Iran.

5. F. Dehghan Nayeri, E.AslSoleimani, M.H.Maleki,R.Jalali, N.Manavizadeh, M.R. Ketabdari,” Investigation of Ni/Cu on n type polysilicon for Using Front-Contact in Solar Cell”, Iran physic Conference 2005, Tehran, Iran.

6. N.Manavizadeh, R.SafaIsini, E.Asl soleimani, F. D. Nayeri, S.Mohajerzadeh, H.Ghafoori Fard, “Investigation on Electroplated Ni/Cu Ohmic Contact Multicrystallian Silicon for Solar Cell”, Iran physic conference 2005, Tehran, Iran.

7. F. Dehghan Nayeri, S.Jabbarnia, E.Asl Soleimani, M.H.Maleki, S.mohajerzadeh, A.Mohammadi Gheidari, “ Comparison and Optimization different ohmic contact on Polysilicon”, Iran Condence Matter physic Conference 2003, Tehran, Iran.

8. F. Dehghan Nayeri, A.Moafi, E.Asl Soleimani, M.H.maleki, A.A.masoudi,” Optimization of metal ohmic contacts on polysilicon Substrate in Solar Cell”, Iran Physic Conference 2003.

9. Y. Abdi, P. Hashemi, S. Mohajerzadeh, E. Asl Soleimani, E. Arzi, F. D. Nayeri, “ Photoluminescence of nano Structured Silicon fabricated by Hydrogenation”, Iran Condense Matter physic Conference 2003, Tehran, Iran.

• Advanced Solid State physic1 (20/20)

• Advanced Solid State physic2 (19/20)

• Advanced Semiconductor Devices (19.5/20)

• Advanced Quantum Mechanics1 (15/20)

• Advanced Quantum Mechanics2 (16/20)

• Advanced Statistical mechanic(18/20)

 

 

• Dr.Ebrahim Asl Soleimani, Associate Professor, University of Tehran. email: soleimni@ut.ac.ir

• Dr. Shamsoddin Mohajerzadeh, Associate Professor, University of Tehran. email: smohajer@tfl.ir

• Dr.Mohammad Hadi Maleki, Assistance Professor, Laser Research Center, Atomic Energy Organization of Iran, email: mmaleki@aoei.org.ir.