|
B.Sc.
(Electrical
Engineering-Electronics)
University of
Tehran,
Electrical Engineering (4th year)
Entered
September 2001 (Ranked 138 among more than
400,000
Applicants
in National Universities Entrance Exam.)
·
Experience
in HDL languages such as Verilog
·
Experience
in C++, Pascal, Visual C++
·
Experience
in MATLAB project solving
·
Familiarity
with simulation of semiconductor devices and processing with DESSIS,
GENESISe and ADS
·
Familiarity
with simulation of integrated circuits with HSPICE, PSPICE and
ORCAD
·
Experience
in Electron beam Nanolithography
·
Studying
on Photonic crystal
·
Familiar
with standard silicon fabrication technology (including MOSFET
fabrication).
·
Familiarity
with clean room processes and
equipment.
|
·
March
2005 – Present
·
Oct. 2005 –
Present
·
April 2005 – Present
·
July 2002 –
Present
|
University
of Tehran IEEE Student Branch Chairman
Nano
Society of University of Tehran Chairman
Faculty
of Eng. Of University of Tehran Scientific Branches
Chairman
Research
assistant,
Thin Film Lab., University of Tehran
·
Studying on CNTs (
Carbon Nanotubes)
·
Experience in
fabrication of (CVD) Chemical Vapor Deposition
System
·
Experience in
fabrication of Nano-transistors
·
Experience in
nano-lithography
·
Studying on vacuum
systems and pumps used for deposition
chambers
·
Familiarity with some
analysis methods like XRD, TEM and SEM
·
Working with E-beam,
sputtering, etching, diffusion and CVD
systems
·
Design and fabrication
of high voltage power supply 1.5 KV and
1A
·
Nanotechnology (NEMS,
MRAM, Nano displays, self assembly material, Carbon
nanotubes)
·
Experience in CVD
technique of TiO2 deposition
·
Familiarity with Micro
Electro Mechanical Systems (MEMS)
·
Familiarity with design
of high speed and low power OPAMPs
·
Experience in
Fabrication of Nanolithography System |
|
Teaching
Experience: |
|
|
·
Nov.
2003 – Jun. 2004
·
Nov.
2004 – Jun. 2005
·
Sep.
2005 – Dec. 2005 |
Electronics
I Teaching Assistantship, Theory course, University of
Tehran
Electronics
I Teaching Assistantship, Theory course, University of
Tehran
Electronics
I Teaching Assistantship, Theory course, University of
Tehran |

·
Medal and
certificated for appreciation of the best poster presentation at Iran
national physics annual conference, 23- 26 August
2004.
·
ECE Dept.
Dean certification and conference award (3 Gold coins) of the best paper
at The 1st Annual Symposium of ECE Young Researchers, Esfand 12th (March
2nd), University of Tehran. Referees mark average:
96/100
·
University
of Tehran best B.Sc researcher award. (3 Gold coins and University
President appreciation letter), December
2005.

·
Nano-lithography
using carbon Nano-tubes for sub-micron and sun-10-nanometer scales,
submitted to European Patent
Application
Ø
S.
Mohajerzadeh, Y.Abdi, H.Hosseinzadegan, J. Koohsorkhi, H.
Radamson

1.
“PECVD-grown
carbon nanotubes on silicon substrates suitable for realization of
field-emission devices”; published in Journal of Fullerene, Carbon
and Nanostructures. 13(Suppl 1):355-364, 2005, ISSN:
1536-383X.
Ø
J.
Koohsorkhi, H.
Hosseinzadegan, S.
Mohajerzadeh, E. Asl. Soleimani and E.
Arzi.
2.
“Fabrication
of Self-Defined Field Emission Transistors on Silicon Substrates using
PECVD-grown Carbon Nano-tubes” to be published in Journal of
Fullerene, Carbon and Nanostructures.
Ø
J.
Koohsorkhi ;
H. Hosseinzadegan ; S.
Mohajerzadeh
3.
“PECVD-grown
carbon nanotubes on silicon substrates suitable for nano-lithography”
to be published in Applied Physics Letters 2005
Ø
Y. Abdi,
S. Mohajerzadeh, H. Hoseinzadegan and J.
Koohsorkhi.
4.
“PECVD-grown
Carbon-nano-tubes on Silicon Substrates with an anomalous Nickel-seeded
Tip-growth structure” published in Journal of Material Science and
Engineering C, Elsevier.
Ø
Y. Abdi,
J. Koohsorkhi, J.Derakhshandeh S. Mohajerzadeh, H.Hoseinzadegan, M.
D. Robertson, C. Bennet and H. Radamson
5.
“Fabrication
of 100nm gate length MOSFET’s using a novel carbon-nanotube-based
nano-lithography” published in Journal of Material Science and Engineering
B, Elsevier.
Ø
J.
Derakhshandeh, Y. Abdi, S. Mohajerzadeh, H. Hosseinzadegan and
H.Rademson.
6.
“PECVD-grown
Vertically-aligned carbon nano-tubes on silicon suitable for
nano-transistor fabrication” to be published in Journal of Vacuum Science and
Technology, 2005.
Ø
Y. Abdi,
J. Koohsorkhi, J. Derakhshandeh, S. Mohajerzadeh, A. Khajooeizadeh, H.
Hoseinzadegan, M.D. Robertson and J.C.
Bennett.
7.
“PECVD-grown
carbon nanotubes on silicon substrates suitable for realization of
self-aligned field-emission transistors”; presented at EMRS Spring
Meeting, Strasbourg, France, May 24-28,
2004.
Ø
J.
Koohsorkhi, H.
Hosseinzadegan, S.
Mohajerzadeh, E. Asl. Soleimani and E.
Arzi.
8.
“Novel
self-defined field emission transistors with PECVD-grown
Carbon Nano-tube on silicon substrates”,
1548-3770, P.55, 56; presented at
Device Research Conference, USA, 2004.
Ø
J.
Koohsorkhi ; H.
Hosseinzadegan
; S.
Mohajerzadeh; M. D. Robertson
9.
“Encapsulated
Vertically Grown Carbon Nano-Tubes for Submicron and Nano-Lithography”;
presented at Material Research Society
(MRS) spring meeting, San Francisco, CA, March28-April1
(2005).
Ø
Y. Abdi,
J. Koohsorkhi, P. Hashemi, S. Mohajerzadeh, H.
Hosseinzadegan and L. Rezaee
10. “Anomalous
tip growth of carbon nanotubes on silicon substrates using a PECVD method”
presented at 207th
Meeting of the Electrochemical Society, Inc. (ECS)- Quebec City,
Canada May 15-20, 2005
Ø
J.
Koohsorkhi, Y. Abdi, H. Hosseinzadegan, S. Mohajerzadeh, M.D.
Robertson and C. Bennett
11. “Gated
Field-emission Nano-Structures for carbon-based Nanolithography”
presented at 207th
Meeting of the Electrochemical Society, Inc. (ECS)- Quebec City,
Canada May 15-20, 2005
Ø
Y. Abdi,
J. Koohsorkhi, H. Hosseinzadegan, S. Mohajerzadeh, M.D.
Robertson
12. “PECVD-grown
Carbon-nano-tubes on Silicon Substrates with an anomalous Nickel-seeded
Tip-growth structure” presented at EMRS Spring
Meeting, Strasbourg, France, May 2005
Ø
Y. Abdi,
J. Koohsorkhi, J. Derakhshandeh, S. Mohajerzadeh, H.
Hosseinzadegan, M.D. Robertson and C.
Benet
13. “Application
of Encapsulated PECVED-grown Carbon Nano-Structure Field-Emission Devices
in Nanolithography” presented at
Nanotech,
(2005)
Ø
J.
Koohsorkhi, Y. Adbi, S. Mohajerzadeh J. Derakhshandeh, H.
Hosseinzadegan and A.
Khakifirooz
14. “Application
of carbon nanotubes in nano-lithography and nano-electronics” presented
at Device
Research Conference, USA, 2005.
Ø
Y. Abdi1,
S. Mohajerzadeh, H. Hosseinzadegan, D. Shahrjerdi, M. Robertson and
J.C. Bennett
15. “PECVD-grown
Vertically-aligned carbon nano-tubes on silicon suitable for nano-transistor
fabrication and nano-scale writing” presented at Canadian
Semiconductor Technology Conference (2005).
Ø
Y. Abdi,
S. Mohajerzadeh, H. Hoseinzadegan, A. Khajooee, M.D. Robertson and
J.C. Bennet
16. “Design
and Fabrication of an Infrared Planar Reflector Using Carbon Nanotubes”
accepted and published in proceeding of The Joint 30th
International Conference on Infrared and Millimeter Waves and 13th
International Conference on Terahertz Electronics, September 19-23,
2005,Williamsburg, Virginia
USA.
Ø
Y.
Komijany, H. SedaghatPisheh, Y. Abdi, S. Mohajerzadeh, M. Shahabadi, H.
Hosseinzadegan, M. Araghchini
17. “Setting
up the
DC-PECVD system for CNT's vertical growth beside catalyst”, 115,
Presented at Proceedings of the Annual
Physics Conference of Iran, 23-26 August
(2004).
Ø
Hosseinzadegan,
Hadi ;Koohsorkhi,
Javad; Mohajerzadeh, Shamsoddin; Arzi,
Ezatollah;
18. “Fabrication
of Tunneling-Field Emission
Transistors with PECVD-grown Multiwall Carbon Nanotubes on Silicon
Substrates”; 123, Presented at Proceedings of the Annual
Physics Conference of Iran, 23-26 August
(2004).
Ø
Koohsorkhi,
Javad; Hosseinzadegan,
Hadi; Mohajerzadeh, Shamsoddin; Arzi,
Ezatollah
19. “Application of carbon
nanostructure for submicron nanolithography, using the emission current”
presented at 13th Iranian
Conference on Electrical Engineering, ICEE 2005,
May 10- 12, 2005 University of Zanjan,
I.R.Iran
Ø
H.
Hosseinzadegan, Y.
Adbi, J. Koohsorkhi, S. Mohajerzadeh, E. Asl. Soleimani

20. “Application
of Encapsulated PECVD-grown Multiwall Carbon Nanotubes in Novel Gated
Field-Emission Device Fabrication and Nanolithography” presented
at
The 1st Annual Symposium of ECE Young
Researchers, 2 March
2005, ECE Dept., Faculty of Engineering. University of Tehran,
I.R.Iran
Ø
H.
Hosseinzadegan,
H.Sedaghatpisheh |